News

What are the functions of gates?

Publish Time: 2024-04-02

Barrier Gate, also known as vehicle barrier, was originally introduced from abroad and is called Barrier Gate in English. It is a channel entrance and exit management device specially used to restrict the movement of motor vehicles on the road. It is now widely used in highway toll stations, parking lots, communities, enterprises and institutions. at the door to manage the entry and exit of vehicles. The electric barrier gate can realize the lifting and lowering pole through remote control alone, or it can be automatically managed through the parking lot management system (i.e. IC card swiping management system). According to the use place of the barrier gate, its gate poles can be divided into straight poles, 90-degree curved poles, 180-degree folding poles and fences.


The barrier gate is composed of a reduction box, a motor, a (or hydraulic) transmission mechanism, a balancing device, a chassis, a gate rod bracket, a gate rod and other parts.


With the continuous development of the automobile industry and the increasing number of automobiles, the demand for barrier gates is also increasing, and higher requirements are put forward for the performance of barrier gates. Such as barrier gate integrated movement, clutch device, intelligent anti-lift function, obstruction return device, heating function (ensure use in an environment of minus 40 degrees), exhaust cooling system (lower motor temperature in time), automatic clutch device, anti-collision Take-off device, etc. The rise and fall speed of the pole ranges from 0.8 seconds to 6 seconds. The length of the pole is 0-7 meters, depending on the actual channel width on site.


Barrier gates have become increasingly high-tech to adapt to market demand for products, and have become key lane equipment in parking system management.


Gate function


Manual opening function after power failure


After the barrier gate is powered off due to various reasons, the gate lever can be raised or lowered manually through the distributed clutch switch key to ensure that the vehicle channel control function can be realized normally even in the event of a power outage.


time protection function


During the opening or closing process of the gate, the electronic control part of the gate automatically records the running time of the motor. When the running time of the motor exceeds the predetermined value, a signal is output to control the motor to stop running to prevent the gate rod from running due to the failure of the photoelectric detection device. Exceeding the limit position may cause vehicle damage or damage to the barrier, thereby improving the reliability of system operation.


Turn on priority function


During the operation of the gate, no matter whether the gate lever is in the opening process, closing process or stopped state, if the gate opening signal is output, the gate lever will immediately perform the opening (upward) action to prevent the vehicle from being smashed due to various reasons. Phenomenon.


Remote control switch function


By configuring a dedicated triple electronic switch and a remote control electronic switch, the opening and closing of the gate can be controlled remotely.


Remote control interface


The electronic control part of the barrier gate can be equipped with a standard R485 interface, which can control the opening and closing of the barrier gate through a remote computer or other equipment to achieve remote automatic management.


Working temperature control function


After the barrier gate temperature control device is installed, the electronic control part of the barrier gate automatically monitors the internal temperature of the barrier gate. When the temperature exceeds the predetermined temperature range, it automatically outputs a signal to control the temperature control device to start heating or ventilation and heat dissipation, which improves the overall operation of the barrier gate. reliability.


Auto-closing function when the car is moving


After the vehicle detector is installed, the barrier gate can be automatically closed after the vehicle passes through the barrier gate, thereby improving the automation of the vehicle passage control system. It can also ensure that the vehicle stops under the gate pole and the gate pole never falls, improving the passage Management security.


Luminous pole function


The standard barrier gate straight pole has a series of luminous poles. The gate pole lights up to prompt passage, serving as a warning and decoration.

×

Contact Us

captcha