Household Rice Mill can reduce the broken rice rate from the following aspects.
First, start with the selection of rice. Try to choose rice with full grains, uniform size, and no pests and damage. Such rice can better withstand mechanical forces during the rice milling process and reduce the possibility of breaking. At the same time, when storing rice, pay attention to keeping it dry and ventilated to prevent the rice from getting damp, mildewed or otherwise damaged, because damaged rice is more likely to break during rice milling.
Secondly, it is crucial to adjust the parameters of the rice mill. According to the variety and quality of rice, the parameters of the rice mill such as whitening pressure, roller speed and feed speed can be reasonably adjusted. Generally speaking, reducing the whitening pressure and roller speed can reduce excessive extrusion and friction on the rice, thereby reducing the broken rice rate. At the same time, controlling the feed speed to avoid excessive feeding causing rice accumulation and blockage can also help reduce the generation of broken rice. For example, you can first test mill at a slower feed speed, observe the broken rice situation, and then gradually adjust to the appropriate feed speed.
In addition, ensure good maintenance and care of the rice mill. Regularly check the various parts of the rice mill, such as rollers, screens, transmission devices, etc., to ensure that they are in good working condition. If the rollers are severely worn, they should be replaced in time to avoid affecting the rice milling effect and increasing the broken rice rate. At the same time, keep the screen clean and unobstructed to prevent debris from clogging the screen and affecting the normal flow and screening of rice.
In addition, the correct operation method can also effectively reduce the broken rice rate. When using Household Rice Mill, strictly follow the requirements of the instructions. Before feeding, the rice can be preliminarily cleaned to remove impurities and foreign matter. During the rice milling process, pay attention to the operating status of the machine. If there is any abnormality, stop the machine for inspection in time. After the rice milling is completed, the residual rice and bran powder inside the machine should be cleaned in time to prepare for the next use.
In short, by selecting high-quality rice, reasonably adjusting parameters, doing maintenance and correct operation, the broken rice rate of Household Rice Mill can be effectively reduced, the quality of rice milling can be improved, and better quality rice can be provided for families.
