Adjusting the rice sieve of Household Rice Mill is an important part to ensure the rice milling effect and rice grain quality. The following are the specific steps and precautions for adjusting the rice sieve of Household Rice Mill:
1. Inspection and judgment
First, during the rice milling process, if it is found that there are more whole rice grains mixed in the rice bran, this usually indicates that there is a problem with the rice sieve and it needs to be checked and adjusted.
2. Steps for adjusting the rice sieve
Shutdown and power off: Before adjusting the rice sieve, first make sure that the Household Rice Mill has been shut down and the power is disconnected to ensure safety.
Open the rice sieve cover: Find the rice sieve cover of the rice mill and open it to observe and adjust the rice sieve.
Check the status of the rice sieve: Carefully observe the integrity of the rice sieve to see if there is any damage, holes or deformation. If the above problems are found, they should be repaired or replaced in time.
Adjust the position of the rice sieve: If the rice sieve is not damaged, but the rice milling effect is still not good, you can try to adjust the position of the rice sieve. By adjusting the distance between the rice sieve and the rice milling roller, the strength and effect of rice milling can be changed. Generally speaking, the closer the distance, the greater the rice milling force, but it may also cause rice grains to break; the farther the distance, the smaller the rice milling force, but it may not be able to completely remove the rice bran.
Replace the rice sieve: If the above adjustments cannot solve the problem, you may need to replace the rice sieve. According to the model and specifications of the rice mill, select a suitable rice sieve for replacement. During the replacement process, make sure that the rice sieve fits tightly with the rice mill to avoid leaking or jamming rice.
3. Precautions
Safety first: When adjusting the rice sieve, make sure that the power supply is disconnected and follow the safe operating procedures.
Choose the right tools: Use the right tools to adjust and replace the rice sieve to avoid damaging the machine or the rice sieve.
Cleaning work: After adjusting or replacing the rice sieve, clean the rice mill to ensure that there are no impurities and residues inside the machine.
Regular maintenance: In order to maintain the good performance and service life of the Household Rice Mill, it is recommended to perform regular maintenance and care. This includes cleaning the rice sieve, checking the motor and transmission system, etc.
Through the above steps and precautions, the rice sieve of Household Rice Mill can be effectively adjusted and maintained to ensure the rice milling effect and rice grain quality.
